4 Critical Signs Your Pneumatic Actuator Needs To Be Replaced
Posted in Uncategorised, on December 02, 2021 By Admin
Quality pneumatic actuators are an integral part of high-powered air compressors. These mechanical cylinders help produce motion in air-powered tools and accessories. However, despite their robust nature and manufacturing standards, actuators can wear and tear over time.
Here are 4 signs that call for an immediate replacement of a pneumatic actuator.
Loud Noises During Operation
Generally, most pneumatic actuators produce a low or medium level of noise. However, they can get quite loud if an internal mechanical component is dislodged. Moreover, actuators work at a high intensity on a daily basis, which makes them even more susceptible to wear and tear. Hence, if your operators report any loud noises while operating the machine, consider having them replaced or at least examined.
Insufficient Velocity
Pneumatic actuators use compressed air to generate high velocities, rapidly accelerating and decelerating as the occasion demands. Therefore, any drop in its speed is noticeable, indicating that it is poorly converting the input pressure. In such cases, you'll need to replace them with new ones. Have your maintenance team inspect your actuator’s performance daily to ensure you have sufficient velocity powering your tools and equipment.
Rusting and Corrosion
Corrosion happens when moisture enters your air compressor. The compressor's components will suffer from rusting and corrosion before the actuators. Thus, if the actuators have begun rusting, then your air compressor is definitely worse for the wear. In such cases, consider having the entire pneumatic system repaired or replaced to maximize your productivity.
In Operation For More Than Ten Years
Any machine or pneumatic equipment will have a significant dip in performance upon reaching ten years of continuous, high-intensity operation daily, for no manufacturers can guarantee consistent performance beyond that point. If this is the case with your equipment, then consider replacing them.
To conclude, if you find your pneumatic actuators exhibiting any of these 4 signs, then understand that it has it is overdue for a replacement.
If you have yet to find a dependable pneumatic and electrical actuator supplier, you can always count on McRae Engineering Equipment Limited for all your needs. With decades of experience, we guarantee only the best solutions for your equipment troubles. Contact us today to learn more about everything that we can do for you.
